1

Mix a gallon of water with a few drops of dishwashing liquid.

2

Use a spray bottle and wet the area where the strip is to be applied

 1

3

Saturate windshield with soap mixture

 4

Peel off the windshield strip

5

Spray the strip completely

6

Carefully place the windshield strip over the windshield  

7

Use a squeegee to get rid of the bubbles  

 8

Make sure you take out all the water bubbles before you proceed into the next step

9

Mark down the edges with the squeegee

10

Use a razor or razor knife to cut any excess of decal left over  

11 

Make sure you use the razor all the way to the other end.  

 12

Don't rush trough this step, and carefully slide the razor through.

13

 Peel of any extra vinyl before it dries out, and once again mark down the edges with the squeegee

 13

14

This is the final result.